£560,000

Marten 49

Car Details
Boat type Sail
Make Marten
Model 49
Year 2007
Fuel type N/A
Hull material Carbon Fibre
Seller Note

Overview For sale – 2007 Marten 49. A fabulous example of this cutting edge cruiser racer which have the benefit of an unique hydraulic lifting keel which can go from 2.10m to 3.80m at the touch of a button. Reichel Pugh Design, Full carbon construction, HallSpars carbon mast, HARKEN hardware. Beautifully appointed interior, professionally set up and permanently maintained by her full time skipper makes this Marten 49 arguable the finest example of a cruiser racer to be found anywhere. No expenses have been spared to keep her in mint condition and with the top end equipment either for cruising or racing. Hall Spar carbon mast, North Sails 3DL racing sails, INCIDENCES DFI cruising sails, 2015 flag blue AWLGRIP painting for dek and hull, bespoke carbon V-boom built by Petitjean composites, Spectra 60l/h watermaker, MASTERVOLT electrical system incl. Lithiium-ion batteries, teak deck recaulking, new LEWMAR windlass, HARKEN Carbon winches series, recent foresail furling system,twin carbon wheel steering… Do not hesitate to contact Ancasta Port Napoleon for any more information +33 442 058 888 or portnapoleon@gmail.com.

Build MARTEN49 Performance Cruising Yacht built by Azzura Marine in 2007

Designer: Reichel Pugh Yacht Design (Approximates)
Length——————–15m 49.21ft
Beam———————-4.17m 13.68ft
Displacement———–11,229kg 24,755lb (sailing)
Displacement———–9,500kg 20,943lb (lightship)
Ballast ——————-3,413kg 7524lb
Draft Keel Down——-3.7m 12.14 ft
Draft Keel Up———–2.1m 6.89 ft

STRUCTURE
Hull construction
Construction is carbon fibre SPRINT with Core Cell foam cores. Reinforced at high stress areas with carbon fibre.
Internal structure
Bulkheads, structural frames, longitudinals, and centre case are constructed from carbon SPRINT materials with Core Cell foam core.

Chain plates
Carbon fibre chain plates built into the hull laminate

PAINTING
2015 – Awlgrip Flag Blue painting
2015 – Awlgrip primary layer
Cabin Top, Deck and Cockpit Paint

Joinery Finish
All interior joinery is finished with 2-pack semi gloss polyurethane clear coating.

EXTERIOR FIT OUT
Deck Fittings
6x mooring cleats, 12x 600 mm stanchions in bases, 2x aft pushpits integrating flag holder and stern nav. light and bow rails with separate red/green nav. lights.
Double 1 x 19 wire lifelines with turnbuckles. Forestay chainplate with attachment for headsails.

Deck Hardware
Teak toe rail forward of the mast, Two 500 cm genoa tracks with 2 adjustable Genoa cars and 2500 mm mainsheet traveller track and car.

Pad Eyes
Pad eyes for holding and parking spare halyards. Spin guy blocks, spin sheets, and barber hauler and pole down haul blocks.

Deck gear
Spinlock jammers on halyards, reef and control lines renwed in 2015
Trim lines, mainsheet and halyards led under deck to winches.
All blocks are ball bearing.

Winches
Primaries: 2 x Harken 65.3 carbon
Secondaries: 2x Harken 50.2 Carbon
Halyards: 2 x Harken 50.2 (1 Electric)
Handles

Deck Hatches
All cabin top hatches are Marten carbon flush fitting with polycarbonate lids. Hatches into lazarette, forepeak and anchor locker are Marten carbon flush hatches with teak deck finish.
Windows/hatches/lockers
2x port lights in cockpit – one large plexiglass sliding companionway hatch with plexiglass washboards.
1 large hinged aft lazarette flush hatch
2 plexiglass salon windows set flush into the cabin top

Teak
Nominal 9-mm Teak laid deck on cockpit seat and cockpit floor and foredeck.
>> Recaulking in 2017

Forepeak
Sail storage locker in the foredeck with flush composite hatch lid. Self-draining anchor locker with hinged flush composite hatch lids.

Helm Station
2x compass’s on top of the steering pedestals
6.11 Lazarette
Access through flush carbon deck hatch.

SAILING SYSTEMS
Hydraulic Lifting Keel
Lifting keel is raised and lowered with a hydraulic lifting ram and dedicated hydraulic powered pump.

Rudder
The rudderstock is laminated with Carbon fibre with a composite blade. Rudder self aligning bearings was changed in 2018.
Rudder blade modified and extanded by 20 Cm
Profil modified

Twin wheel steering, Carbon 1050 mm diameter wheels wire steering and composite quadrant. A spare alloy emergency tiller is provided.

Inventory Brookes and Gatehouse (B&G)

1 x Hercules 3000 performance processor including Deckman for windows program.
1 x GFD standard display
4 x 20/20 display red.
1 x Carbon mast display bracket
1 x Carbon mast head unit 57inch
1 x B&G depth transducer
1 x B&G speed paddle wheel
1 x B&G network compass
1 x String pot keel position sensor
1 x Heel sensor

Pilot system
1 x B&G H3000 ACP
1 x Rudder reference unit
1 x Hydraulic ram

Main Electronic Components
1 x Raymarine C120 Chart Plotter (colour) with gps anntenna
1 x VHF ICOM M411
1 x Key board
1 x 15” LCD screen at chart table NEOVO
1 x 17” LCD screen at main bulk head
1 x JVC DVD changer
1 x Bose CD compact stereo system
2 x Bose speaker main saloon
2 x waterproof speaker cockpit

GROUND TACKLE
Anchor Equipment
1500 W LEWMAR windlass + wireless remote control + cable remote
16 kg Delta anchor
Extra kedge anchor
60 m 10mm galvanised anchor chain
10 m 10mm Nylon anchor warp
>> Carbon fold out anchor arm.

TENDER
MERCURY INF 290 Air deck Hypalon

MISCELLANEOUS
Cockpit table with bag
1 x bimini with arch (to be fitted)
2 x sun shade cover (1 fore aft deck + 1 for foredeck)
1 full cover tent
cockpit cushions
6 pax liferaft serviced in 2017
12 x standard Fenders
1 x Inflatable Jonbouy
6 x winch handles
1 x horse shoe life ring
1 x bathing ladder
Ropes and lines